Infiniti 36GT SKAZKA

Year: 2013
Current Price: 295,000 EUR
Location: Turkey
Hull Material: Pre-Preg Carbon Fiber

The Infiniti 36GT has been designed as a high performance gentleman’s day sailor with the ability to either day sail short handed or race fully crewed; performance and ease of handling are paramount for the owner.

The Infiniti 36 GT redefines the genre and delivers unequalled performance, balance and versatility.

When reaching the Infiniti 36 GT provides exhilarating performance with speeds comfortably in excess of 20 knots.


Present Boat Name SKAZKA
Year 2013
Model Infiniti 36GT
Builder Danish Yachts
Designer Hugh Welbourn
LOA 11.00m - 36.09ft
Beam 3.00m - 9.84ft
Draft Deep 2.40m - 7.87ft
Displacement 2,400.00kg - 5,291.00lbs
Hull Material Pre-Preg Carbon Fiber
Rig Material Carbon Fiber
L/A Date 2015-08-19
Deck Color Blue/White
Engine HP 9HP
Engine Manufacturer Yanmar
Engine Model 1GM 10
Fuel Diesel
Hull Color Blue
Steering Twin wheel

Hull/Deck Construction Details

  • Features a custom Dynamic Stability System (DSS) foil drive system with cockpit controls. Find out more about DSS here.


Interior Layout

  • 5 x Bunks: Carbon fibre, there are no pipecots, white finish according to interior coating
  • Bunk lee cloths, according ISAF Spec. Reg.
  • Portable toilet: Porta Potti
  • 4 x Inspection hatches: Circular watertight. Colour white according interior coating
  • 2 x Henderson round hatches on aft bulkhead, for ventilation.

Electrical System

  • Electrical panel: Carbon fibre, clear finish
  • Engine start battery bank: Optima batteries — Specifed by Danish Yachts
  • House battery bank: Optima batteries — Specifed by Danish Yachts


  • Navigation lights: Tri-colour masthead
  • Interior lights: LED lights
  • Nexus Instrument display repeaters at mast.
  • VHF
  • Load cells for wing foil
  • GPS

Deck Gear

  • Triple unit halyard stopper: 2 x Spinlock XCS0814 silver triple unit. Halyards 2 gennaker, 1 jib, 1 main 2 reef lines
  • Single unit stopper: 2 x Spinlock XCS0914 silver single unit. Deflector and Outhaul
  • Single unit cam cleat: 3 x Spinlock PXR Cam Cleat PXR0810/SW for boom vang and cunningham control line
  • JIB sheet control: 2 x Kohlhoff loop alu diam.46 ring KH-LRING46
  • JIB sheet control: 2 x Karver diam.57 Carbo T2 loop soft attach block #21K1
  • Main sheet system: Karver- [#2604x1/#2602x2/#2148x1/#144x1/#2135x1/#2646x1]
  • Gennaker sheet blocks: 2 x Karver diam. 57 high load sheave; installer in a carbon sheave box
  • Tack line control: 2 x Spin lock side mount. Stopper XCS-SMNT HPW
  • Mast base blocks: 8 x Harken diam.57 mast base halyard block #1988
  • Primary winches: 2 x Harken performa quatro 2 drums 4 speed self-tailing [46STQP]
  • Cabin top winches: 2 x Harken performa 2 speed self-tailing [40.2STP]
  • Running BS winches: 2 x Harken performa 2 speed self-tailing [40.2STP]
  • Mooring cleat: stainless steel X-foldbar cleat 153mm
  • Lifelines: 4 x Stainless steel
  • Stanchions: 8 x Stainless steel
  • Pulpit: Stainless steel
  • Stern push pit: 2 x stainless steel
  • Forward hatch: Lewmar 18" low profile hatch
  • Aft hatch: Carbon fibre flush
  • Winch handles: 4 x Harken aluminium, black handles 2 x Speedgrip #B10A5G / 2 x Speedgrip #B8A5G
  • Ensign staff: Carbon fibre wing section profile
  • Manual compass: plastimo .
  • Lashing for blocks: 15 x Spectra lashing for blocks attachments
  • Foot bars: 4 x Carbon fibre, clear finish
  • Tweaker block: Kholhoff Loop block 45 w/diamond knot
  • Cockpit tweaker control: 2 x Karver Ball bearing cam cleat #150

Winch Package

  • Full Harken winch package including Harken 46 Quattro primary winches
  • Spinlock jammers and clutches

Spars & Standing Rigging

  • Mast: High modulus Carbon, 2 Spreader, Section 176m. Regatta split for transport. Clear coat
  • Boom: Standard Modulus carbon and foam core box boom. Clear coat
  • Vang: Aluminium telescopic gas strut. Integral 3:1 system
  • Bowsprit: Carbon Fibre moulded to hull - removeable
  • Mast jack: Internal hydraulic jacking cylinder Enerpac 10T all system fittings included
  • Mast step: Female type aluminium mast base. Fore & Aft adjustment by bolts
  • Wind instruments: Located at Mast head
  • Windex: 12V system with windex light
  • Standing rigging: EC6 Carbon rigging complete package, including tangs, turnbuckles, seats and misc. fittings
  • Running backstays: 5T Kevlar eye to eye
  • Backstay deflector: x 2
  • Forestay foil: hank on headsails, no foil
  • Instrument bracket: carbon fibre
  • Chainplates bushing P&S: x 2 - Stainless steel 316, laminated to hull deck joint
  • Chainplates pins P&S: x 2 - Stainless steel 316
  • Forestay toggle and pin: Stainless steel 316

Sail Inventory

All sails by North Sails, Denmark

  • Mainsail and boom cover: 44.4m2 - 3Di + 1 reb Full batten 4 leech battens
  • Light Jib: 3Di 105% 30.5m2 + 1 full batten 3 leech battens
  • Medium Jib: 3Di 90% 20m2 + 1 full batten 3 leech battens
  • Heavy Jib: 3Di 105% 30.5m2 + 1 full batten 3 leech battens
  • A1 ASYMMETRIC - Gradient Superlite 40
  • A2 ASYMMETRIC - Gradient Superkote 60
  • A5 ASYMMETRIC - Gradient Maxikote 150
  • Storm Jib - C-cut Polyester Nordac
  • Quad: Gradient Aramid Laminate T1 ZL06

Spares & Other Features


  • Keel fin: Carbon keel fin + carbon keel trunk
  • Bulb: Lead bulb
  • Wing foil: Carbon foil
  • Rudder: Carbon


  • Rudder: Custom Isotop Carbon rudder stock and blade
  • Carbon wheel: 2 x Steering wheels 900mm diameter w/3 carbon spokes + carbon rim w/ wooden inserts
  • Pedestal: 2 x carbon pedestals through deck installation for steering lines
  • Emergency steering system: Stainless steel emergency tiller in accordance to ISAF special regulations
  • Bilge
  • Manual pump.
  • Electrical pump, rule 500GPH, in engine space

DSS Wing Foil System

  • Foil drive and motion system: Custom c-designs rack and gear type.
  • Electrical motor to move foil.

Cockpit switches and buttons

  • Propeller lifting system
  • Propeller box: Carbon fibre.
  • Propeller box hull case: Carbon fibre, bonded and laminated to the hull.
  • Universal joint: Marine grade joint

Spares & Safety Gear

  • 2 x Fire extinguishers: as required by EU standard and ISAF Spec. Marine Grade
  • 1 x life raft: 8 men liferaft EU standard
  • 8 x Life vests: as required by EU standard and ISAF Spec.
  • 1 x anchor with 2 metres chain: as required by EU standard and ISAF Spec.
  • 6 x fenders
By submitting this form, you accept the Mollom privacy policy.