FYS Americas: +1 410-267-6550
FYS Europe: +44 1983 200901
FYS Australasia: +61 484 373 304
Farr 25 - WHISPER
Current Price: 49950 EUR
Location: Cascais, Portugal
Hull Material: E-glass Epoxy Foam Core
This one year old Farr25 has won many races in her class, in Cascais and Lisbon and has rekindled a love of the sport, for the owner. Farr25 Whisper has been well prepared and maintained since delivery and the boat is extremely lightweight and fast. Equipped with a set of Olympic Sails, including a main, medium and an A1.5 and a brand new North 3Di Heavy Weather Jib, she is setup for the breezier conditions of the Portuguese Atlantic Coast.
| Brokerage Name | Farr Yacht Sales |
|---|---|
| Model | Farr 25 |
| Builder | OD Yachting |
| Designer | Farr Yacht Design |
| Design # Other | 667 |
| LOA | 7.62m - 25.00ft |
| LWL | 6.96m - 22.84ft |
| Beam | 2.47m - 8.10ft |
| Draft Deep | 1.80m - 5.91ft |
| Displacement | 930.00kg - 2,046.00lbs |
| Ballast | 435.00kg - 997.00lbs |
| Hull Material | E-glass Epoxy Foam Core |
| Hull Bottom | Grey Antifoul on Epoxy primer |
| Rig Material | Carbon |
| Rig Type | Fractional |
| FYS Broker | Joe Hall |
| L/A Date | 2020-08-31 |
| Deck Color | White |
|---|---|
| Engine HP | 4HP |
| Engine Manufacturer | Honda Outboard |
| Fuel | Gasoline |
| Hull Color | White |
| Keel | Carbon Fibre T-Keel |
| Steering | Tiller |
Hull/Deck Construction Details
- Vacuum-bagged foam sandwich construction with epoxy and E-glass composite.
- One-piece E-glass liner composed of a
- · transverse mast step
- · transverse keel floor
- · a single centerline longitudinal
- High-density foam with additional reinforcements in high stress areas.
- Fixed “T”-keel configuration with carbon fin
- Keel is mounted into a trunk in the hull with a single M20 SS bolt
- The keel fin spar is constructed in pre-preg carbon over a foam mandrel
- All carbon rudder stock, and a female molded carbon/foam blade
Interior Layout
- Spacious cabin w/ two bunks and generous stowage
- Water tank with Delivery Pump
- Sink & Cooking Stove
Deck Gear
- Hatch for easy spinnaker hoist & drop
- Sprit extender & spinnaker tack line run below decks exit on cabin top
- Lower lifeline in middle for improved hiking
- Jib in-hauler exits on the cabin back
- Outhaul, cunningham, boom vang and jib halyard fine tune collect in central pod for easy access
- Jib car puller exits on side deck
- Continuous furling jib with below deck Karver furler
- Ball bearing jib lead car
- Harken #8 primary winch
- Cockpit sheet bags
- Harken and Spinlock fittings, Karver furler, Dynema-Vectran running riggings
Spars & Standing Rigging
- Pauger Spars keel-stepped carbon mast and box boom
- Aft-swept single– carbon spreader simplifying tuning and mode changes
- Windex
Sail Inventory
Olympic Sails
Main – NPC Radian NORDAC NDR 5.2 (2019)
Jib – medium Sport Xi Aramid NLXi09 (2019)
Spinnaker – A 1.5 gennaker Superkote 60 (2019)
North Sails
Jib – 3di heavy J3 (2020)
Jib cover
Boom cover
Tiller sleeve / cover
Half deck cover (over boom)
Sheet & cockpit bags
Spares & Other Features
- ISAF approved navigational lights
- Outboard motor stowed in and deployed out of a storage locker via an articulating armature
-
Mooring lines and fenders
Personal flotation devicesOutboard – Honda 4HP (longshaft)
Anchor
Yard and shipping cradle
Spares & Safety Gear
- ISO category B / ISAF category 3 Compliant
- Manual bilge pump
- Magnetic compass
With an exceptional ballast ratio of 50 percent, a light displacement of only 846kg and a displacement-to-length ratio of 111; these parameters with 35m^2 of upwind sail area make the Farr 25 a strong performer upwind, while the 60m^2 well-proportioned spinnaker provides plenty of downwind horsepower. The Farr 25 is also optimized for both ORC and IRC handicap.
Factory finished in epoxy paint and with International Paint anti-foul, the boat is ready to be relocated and relaunched almost anywhere. Shoreside the boat has a high-mode (keel on) cradle which can be adjusted laterally, for shipping / transport.